Plexus 4
Plexus 4
Couldn't load pickup availability
Features
-
4x4 MIDI Routing
Split and Merge each input with each output. The 4x4 Matrix of lighted buttons give clear indication of what messages are going where.
-
Filtering
Block and modify MIDI Messages on each output independently. Can be used like Four stand-alone filter boxes. No computer is required to configure.
-
Poly Chain
Incoming notes can be distributed, round-robin, to different outputs. Use several monophonic synths as one polyphonic synth.
-
Keyboard Split
Send notes to different synths based on the pitch or the velocity of the note played. Easily divide notes from a keyboard up into zones.
-
Clock Division
Divide an incoming MIDI Clock to create slower tempos. Seven divisions settings are available for each output independently.
-
Status Monitoring
Each active button on the 4x4 Matrix will light different colors for incoming messages indicating that a message is being passed, modified or blocked.
-
Presets
128 Presets are available to store every Route, Filter and Poly setting for instant recall. 16 Presets can be recalled using the UI and all 128 can be recalled over MIDI.
-
Poly Channel
Incoming notes on a MIDI Channel can be distributed, round robin, between several MIDI Channels for another type of mono/poly setup using only 1 input and 1 output.
-
USB Host
Make connections from class-compliant USB MIDI devices to the USB Host port, such as Keyboards, Synths and Sequencers. No computer required.
-
USB Device
Connect to a computer using the class-compliant USB MIDI Device port. Creates a new 1x1 MIDI USB Interface in software applications.
-
Bridge Connections
All connections can take part in MIDI signal routing. Pass messages between DIN, USB Host and USB Device connections.
-
Remote Control
MIDI Commands can be used to control several major features remotely, including message routing, poly chaining and preset loading.
Filter Types (per Output)
-
By Channel
Block any of the 16 MIDI Channels. This is the highest priority Filter. If a MIDI Channel is being blocked, then no messages received on that Channel will make it into any other Filters or to the selected Output.
-
Channel Map
Map any of the 16 MIDI Channels any other MIDI Channel. Messages will be mapped to their new Channel before any other Filtering takes place.
-
Clock
Remove all MIDI Clock data.
-
Clock Divide
Reduce the BPM of incoming clock data.
-
Transport
Block all Transport messages. Transport messages consist of MIDI Start, Stop, Continue & Song Position.
-
Note High & Low
Block Notes that are below and above a set threshold on a specific MIDI Channel. Up to four (4) Channels can be set for blocking on each output.
-
Velocity High & Low
Block Notes based on their Velocity that are below and above a set threshold on a specific MIDI Channel. Up to four (4) Channels can be set for blocking on each output.
-
CC High & Low
Block Control Change messages that are below and above a set threshold on a specific MIDI Channel. Up to four (4) Channels can be set for blocking on each output.
-
Pitch
Block Pitch Bend messages on specific MIDI Channels.
-
After Touch
Block all After Touch data by MIDI Channel. After Touch messages consist of Poly Key Pressure and Channel Pressure.
-
Program Change
Remove all Program Change data by MIDI Channel.
-
Poly Channel
Distribute notes in round-robin from 1 MIDI Channel to several others MIDI Channels.
- Power Requirements: 9 volts DC max, 200mA min
- Power Connection: 2.1 mm barrel, center negative
- I/O: 3x MIDI DIN IN, 3x MIDI DIN OUT, 1x USB Type A, 1x USB Type B
- Dimensions: 3.62" x 3.62" x 2.28"
- Assembled in the USA